Dräger MT Ethylene Oxide 0.25-10 ppm - PN 8610580
Dräger MT Ethylene Oxide 0.25-10 ppm
PN : 8610580
|
Measuring Range |
0.25 to 10 ppm |
| Typical Measuring Time |
100 to 500 s |
| Accuracy | ± 25% ( under calibration conditions ) |
|
Ambient Conditions |
|
| Temperature |
10 to 30 °C |
| Humidity |
1 to 25 mg/L |
|
Cross Sensitivity |
No influence at 1 ppm ethylene by: 0.1 ppm acrolein 10 ppm formalldehyde 25 ppm iso-propanol 50 ppm ethanol |
| Hose and probe measurement |
The following flushing time recommendations for hose and probe measurements are marked with a brand-new, dry and clean hose and probes. |
| Hose |
Length (meter) |
Flashing time (min) |
| FKM hose |
5-20 |
3 |
| FKM hose |
45 |
5 |
| PTFE-lined PVS hose |
3-15 | 3 |
| Bar probe 90 (8316532) |
1 | |
| Telescopic probe ES 150 (83 16 533) |
1 | |
| Probe Set GP600 (83 28 667) |
3 |
|
Dräger MT Ethylene Oxide 0.25-10 ppm
PN : 8610580
|
Measuring Range |
0.25 to 10 ppm |
| Typical Measuring Time |
100 to 500 s |
| Accuracy | ± 25% ( under calibration conditions ) |
|
Ambient Conditions |
|
| Temperature |
10 to 30 °C |
| Humidity |
1 to 25 mg/L |
|
Cross Sensitivity |
No influence at 1 ppm ethylene by: 0.1 ppm acrolein 10 ppm formalldehyde 25 ppm iso-propanol 50 ppm ethanol |
| Hose and probe measurement |
The following flushing time recommendations for hose and probe measurements are marked with a brand-new, dry and clean hose and probes. |
| Hose |
Length (meter) |
Flashing time (min) |
| FKM hose |
5-20 |
3 |
| FKM hose |
45 |
5 |
| PTFE-lined PVS hose |
3-15 | 3 |
| Bar probe 90 (8316532) |
1 | |
| Telescopic probe ES 150 (83 16 533) |
1 | |
| Probe Set GP600 (83 28 667) |
3 |
|
Related items
$16.44
$17.30
$288.00
