Dräger SimultanTest CO2, complete - PN 6526170
Dräger SimultanTest CO2, complete
PN: 6526170
Includes: Deluxe Carrying Case, Instruction Booklet, Measuring Device for 7 Tubes, Quick Connect Coupling, Tube Opener, Timer and Draeger-Tubes.
· Systems for testing compressed gases
· Up to 7 contaminants tested at once
· Used with Dräger-Tubes®
Benefits
Tested and approved determination
The test system was developed and designed specifically for the use in the beverages industry, but is applied in a wide field of operations (e.g. in the chemical and petrochemical industry), where the purity of carbon dioxides is required. Using the Dräger SimultanTest CO2, contamination in the outgoing carbon dioxide can be easily
and precisely detected and determined. The working method of the Dräger SimultanTest CO2 is based on the well-established Dräger-Tubes, an very efficient method for detecting and measuring toxic gases. It is possible to reliably detect and determine
potential pollutants such as ammonia, nitrous gases, phosphine, carbon monoxide, sulphur dioxide, hydrogen sulphide and water vapour optionally either individually or simultaneously.
Fast and easy to use
The measuring device, which functions independently of a power source, can be easily connected with the plug-in connector to the carbonic acid pipeline system to be checked. After only a few minutes, the QuickCheck indicates measurement results and provides information about the degree of contamination.
Always ready for use
All components of the Dräger SimultanTest CO 2 are housed readily available in a handy transport case.
| Technical Data | |
| Dräger SimultanTest CO2 | |
| Dimensions of carrying case (L x W x H) |
390 x 315 x 140 mm |
| Weight, including contents |
ca. 3 kg |
| Supply pressure (set on delivery) |
3.0 ±0.2 bar |
| Connections |
Quick-lock coupling (external thread G 1/4) |
| Connection for compressed air supply |
9 mm barbed nipple |
| Flow rate | 0.2, 0.8 and 2.0 l/min |
Dräger SimultanTest CO2, complete
PN: 6526170
Includes: Deluxe Carrying Case, Instruction Booklet, Measuring Device for 7 Tubes, Quick Connect Coupling, Tube Opener, Timer and Draeger-Tubes.
· Systems for testing compressed gases
· Up to 7 contaminants tested at once
· Used with Dräger-Tubes®
Benefits
Tested and approved determination
The test system was developed and designed specifically for the use in the beverages industry, but is applied in a wide field of operations (e.g. in the chemical and petrochemical industry), where the purity of carbon dioxides is required. Using the Dräger SimultanTest CO2, contamination in the outgoing carbon dioxide can be easily
and precisely detected and determined. The working method of the Dräger SimultanTest CO2 is based on the well-established Dräger-Tubes, an very efficient method for detecting and measuring toxic gases. It is possible to reliably detect and determine
potential pollutants such as ammonia, nitrous gases, phosphine, carbon monoxide, sulphur dioxide, hydrogen sulphide and water vapour optionally either individually or simultaneously.
Fast and easy to use
The measuring device, which functions independently of a power source, can be easily connected with the plug-in connector to the carbonic acid pipeline system to be checked. After only a few minutes, the QuickCheck indicates measurement results and provides information about the degree of contamination.
Always ready for use
All components of the Dräger SimultanTest CO 2 are housed readily available in a handy transport case.
| Technical Data | |
| Dräger SimultanTest CO2 | |
| Dimensions of carrying case (L x W x H) |
390 x 315 x 140 mm |
| Weight, including contents |
ca. 3 kg |
| Supply pressure (set on delivery) |
3.0 ±0.2 bar |
| Connections |
Quick-lock coupling (external thread G 1/4) |
| Connection for compressed air supply |
9 mm barbed nipple |
| Flow rate | 0.2, 0.8 and 2.0 l/min |
